Orange Peel Texture ESD Table Mat
ElectroStatic Discharge Materials ( ESD Rubber ) - European Union ( EU ) RoHS Directive 2002/95/EC Compliant
Copyright © GSE ONLINE SDN BHD ( 1116968-P ) ALL RIGHTS RESERVED
Disclaimer :
* Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us .
* Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us .
A) Product Name
Orange Peel Texture ESD Table Mat
B) Raw Material
NBR + Synthetic Rubber
C) Purpose
Orange peel rubber matting features an anti-slip surface with an orange peel texture on the top side. This texture consists of small, rounded bumps or dimples evenly distributed across the mat’s surface.
Anti-Slip Properties:
The orange peel texture enhances traction, making these mats ideal for preventing slips.
To prevent equipment damage resulting from the triboelectric voltage of the static dissipative
D) Scope
Ideal for use in Workstations, Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace, CMOS chips, microprocessors, semiconductors, dish drivers, composites, LCD screen products, circuit product lines, hospitals and Pharmaceutical industries, precision instrument etc
E) Characteristics
1 ) The anti-static mat is made up of two layers, the top layer ( hard ) is static dissipative with an anti-slip feature, and the bottom layer ( soft ) is conductive.
2) Features:-
The anti-static properties of the mat are according to the relative requirements of SJ/T 10694-1996.
The surface resistance of the static dissipative layer ( 1.0 x 10e6 ~ 10e9 Ω )
The surface resistance of the conductive layer ( Below 1.0 x 10e6 Ω )
Volume resistance ( 1.0 x 10e6 ~ 10e9 Ω )
The triboelectric surface voltage of the static dissipative material < 200 V
The time of static discharging below 100V should be less than 1 second.
3) Part / Model No. : ESDOP2GRN1X10D & ESDOP2GRE1X10D
4) Compliant to GB/T14437-97.
5) RoHS compliant.
6) Top Layer Material: Green & Grey (NBR Rubber)
Bottom Layer Material: Black (Synthetic Rubber).
7) Surface Resistivity:
a) Top (1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms)
b) Bottom (1.0 × 10 ²~ 1.0 × 10⁶Ohms)
8) Hardness ( IRHD, Micro Hardness Tester Wallace )
a) Top Green/ Grey Layer: 70 ± 5° ( Shore A )
b) Bottom Black layer: 60 ± 5° ( Shore A )
9) Overall Thickness: 2mm
F) Specifications
1) Model No.: ESDOP2GRN1X10D, Orange Peel Texture Green ESD Table Mat, ~2mm ( Thickness ) x 1,000mm ( 1m) ( Width ) x 10,000mm ( 10m ) ( length ) / roll, weight around 30kgs / roll
2) Model No.: ESDOP2GRE1X10D, Orange Peel Texture Grey ESD Table Mat, ~2mm ( Thickness ) x 1,000mm ( 1m) ( Width ) x 10,000mm ( 10m ) ( length ) / roll, weight around 30kgs / roll
To prevent equipment damage resulting from the triboelectric voltage of the static dissipative
D) Scope
Ideal for use in Workstations, Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace, CMOS chips, microprocessors, semiconductors, dish drivers, composites, LCD screen products, circuit product lines, hospitals and Pharmaceutical industries, precision instrument etc
E) Characteristics
1 ) The anti-static mat is made up of two layers, the top layer ( hard ) is static dissipative with an anti-slip feature, and the bottom layer ( soft ) is conductive.
2) Features:-
The anti-static properties of the mat are according to the relative requirements of SJ/T 10694-1996.
The surface resistance of the static dissipative layer ( 1.0 x 10e6 ~ 10e9 Ω )
The surface resistance of the conductive layer ( Below 1.0 x 10e6 Ω )
Volume resistance ( 1.0 x 10e6 ~ 10e9 Ω )
The triboelectric surface voltage of the static dissipative material < 200 V
The time of static discharging below 100V should be less than 1 second.
3) Part / Model No. : ESDOP2GRN1X10D & ESDOP2GRE1X10D
4) Compliant to GB/T14437-97.
5) RoHS compliant.
6) Top Layer Material: Green & Grey (NBR Rubber)
Bottom Layer Material: Black (Synthetic Rubber).
7) Surface Resistivity:
a) Top (1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms)
b) Bottom (1.0 × 10 ²~ 1.0 × 10⁶Ohms)
8) Hardness ( IRHD, Micro Hardness Tester Wallace )
a) Top Green/ Grey Layer: 70 ± 5° ( Shore A )
b) Bottom Black layer: 60 ± 5° ( Shore A )
9) Overall Thickness: 2mm
F) Specifications
1) Model No.: ESDOP2GRN1X10D, Orange Peel Texture Green ESD Table Mat, ~2mm ( Thickness ) x 1,000mm ( 1m) ( Width ) x 10,000mm ( 10m ) ( length ) / roll, weight around 30kgs / roll
2) Model No.: ESDOP2GRE1X10D, Orange Peel Texture Grey ESD Table Mat, ~2mm ( Thickness ) x 1,000mm ( 1m) ( Width ) x 10,000mm ( 10m ) ( length ) / roll, weight around 30kgs / roll
Model No.:
ESDOP2GRN1X10D
&
ESDOP2GRE1X10D
ESDOP2GRN1X10D
&
ESDOP2GRE1X10D
Orange Peel Texture
Green ESD Table Mat
Model: ESDOP2GRN1X10D
Green ESD Table Mat
Model: ESDOP2GRN1X10D
Orange Peel Texture Green ESD Table Mat
Model: ESDOP2GRN1X10D
Model: ESDOP2GRN1X10D
Orange Peel Texture Grey ESD Table Mat
Model: ESDOP2GRE1X10D
Model: ESDOP2GRE1X10D