Top
( 1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms )
( 1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms )
Bottom
( 1.0 × 10 ² ~ 1.0 × 10 ⁶Ohms )
( 1.0 × 10 ² ~ 1.0 × 10 ⁶Ohms )
GENERAL PURPOSE ESD ( ANTI STATIC )
RUBBER MATSWHY SHOULD WE BE CONCERNED ABOUT THE IMPACT OF ELECTRO-STATIC DISCHARGE ?
WHY ANTI STATIC CARPETING FOR YOUR FACILITY ?
REASON IS TO PREVENT TRIBOELECTRIC DAMAGING OUR MACHINES / EQUIPMENTS / ELECTRONIC PARTS etc
ElectroStatic Discharge Materials ( ESD Rubber ) - European Union ( EU ) RoHS Directive 2002/95/EC Compliant
Copyright © GSE ONLINE SDN BHD ( 1116968-P ) ALL RIGHTS RESERVED
APPLE GREEN
ESD Mat
ESD Mat
A) Product Name
Apple Green ESD Mat
B) Raw Material
NBR + Synthetic Rubber
C) Purpose
To prevent equipment damage resulting from the triboelectric voltage of the static dissipative
D) Scope
Ideal for use in precision instruments, Pharmaceutical industries, circuit product lines, hospitals, LCD screen products, workstations, Electronic Manufacturing, Pharmaceutical Plants, Cleanrooms, Fiber Optics, Electronic Assembly, Electronic Warehousing, Circuit Assembly, Aerospace, CMOS chips, microprocessor, semiconductor, dish drivers.
E) Characteristics
1 ) The anti-static mat is made up of two layers, the apple green top layer ( hard ) is static dissipative, and the bottom black layer ( soft ) is conductive.
2) Features:-
The anti-static properties of the mat are according to the relative requirements of SJ/T 10694-1996.
The surface resistance of the static dissipative layer ( 1.0 x 10e6 ~ 10e9 Ω )
The surface resistance of the conductive layer ( Below 1.0 x 10e6 Ω )
Volume resistance ( 1.0 x 10e6 ~ 10e9 Ω )
The triboelectric surface voltage of the static dissipative material < 200 V
The time of static discharging below 100V should be less than 1 second.
3) Model No. : ESD2APL1X10S
4) Compliant to GB/T14437-97.
5) RoHS compliant.
6) Top Layer Material: Apple Green ( NBR Rubber ),
Bottom Layer Material: Black ( Synthetic Rubber ).
7) Surface Resistivity :
a) Top ( 1.0 × 10 ⁷ ~ 1.0 × 10⁹ Ohms )
b) Bottom ( 1.0 × 10 ²~ 1.0 × 10 ⁶Ohms )
8) Hardness ( IRHD, Micro Hardness Tester Wallace )
a) Top Green Layer: 70 ± 5° ( Shore A )
b) Bottom Black layer: 50 ± 5° ( Shore A )
9) Overall Thickness: Minimum 2.00 mm
10) Surface Finishing: Glossy ( Shining )
F) Specification
1) Model No.: ESD2APL1X10S, ~2mm ( Thickness ) x 1,000mm ( 1m ) ( Width ) x 10,000mm ( 10m ) ( length ) / roll, weight around 30kgs / roll, Shining / Glossy Apple Green, SGS Test Report: CRSSA/190411625-CA09972
Disclaimer :
* Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us .
* Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us .
Model No. :
ESD2APL1X10S
ESD2APL1X10S
